[CarstenKujanek]

It is automatic . Engine seems to have a different cam and has 1.52 to 1 roller rocker arms , accel hei ignition with msd module , weiand 360° intake and 750cfm Holley , vacuum secondary. I use the vacuum at the carb not from the manifold. It is now set at 6 degrees at 1000 , lower rpm is difficult , when you put in D , it goes down to much... I use 100 octane fuel , because with that it runs much better. I ask because of the timing , because i don not want to kill the engine with a wrong set timing on full throttle ;-)