14.02.2014, 18:51
Zu diesem Thema habe ich mal folgenden interessanten Link gespeichert: http://grannys.tripod.com/hillbillyclutchslipper2.html
Wirkt durch die simple Konstruktion zuerst etwas lustig, scheint aber erstaunlich gut zu funktionieren. Man könnte es fast schon als genial bezeichnen.
"Ram 10.5" 3000# Diaphram pp + Ram 900 series sintered iron disc (damped hub) + 17# steel fw + 3.73 gears + hillbilly slipper = 1.304 60' on 275 radials using a Ford Toploader 4spd (small 1-1/16" input / 28 spline output). We also quit twisting the splines in the 28 spline 1310 Spicer slip yokes"
Gruß,
Simon
Wirkt durch die simple Konstruktion zuerst etwas lustig, scheint aber erstaunlich gut zu funktionieren. Man könnte es fast schon als genial bezeichnen.
"Ram 10.5" 3000# Diaphram pp + Ram 900 series sintered iron disc (damped hub) + 17# steel fw + 3.73 gears + hillbilly slipper = 1.304 60' on 275 radials using a Ford Toploader 4spd (small 1-1/16" input / 28 spline output). We also quit twisting the splines in the 28 spline 1310 Spicer slip yokes"
Gruß,
Simon