Themabewertung:
  • 0 Bewertung(en) - 0 im Durchschnitt
  • 1
  • 2
  • 3
  • 4
  • 5

Metalkopfdichtung
#17

6ender = 6 Zylinder Motor.

Ich verstehe dein Problem nicht bei Cometic in den Katalog zu schauen bzw. entsprechend zu bestellen wenn es sonst nichts im Lieferprogramm bei Reinz oder Elring gibt.
Diese Großserienprodukte werden wie eine normale Kopfdichtungverbaut aber mit dem Vorteil das diese nicht durchbrennt sondern das dir eher der Kolben kaputt geht als die Dichtung durch klopfende Verbrennung.
Zitieren


Nachrichten in diesem Thema
Metalkopfdichtung - von 6Zylinder - 09.07.2007, 21:42
Metalkopfdichtung - von Acki - 09.07.2007, 22:10
Metalkopfdichtung - von Torsten Kath - 09.07.2007, 22:20
Metalkopfdichtung - von 6Zylinder - 09.07.2007, 22:40
Metalkopfdichtung - von Acki - 10.07.2007, 00:24
Metalkopfdichtung - von 6Zylinder - 10.07.2007, 17:03
Metalkopfdichtung - von Acki - 10.07.2007, 17:56
Metalkopfdichtung - von 6Zylinder - 12.07.2007, 20:40
Metalkopfdichtung - von Acki - 12.07.2007, 21:07
Metalkopfdichtung - von 6Zylinder - 12.07.2007, 22:56
Metalkopfdichtung - von Benni - 12.07.2007, 23:31
Metalkopfdichtung - von Acki - 12.07.2007, 23:49
Metalkopfdichtung - von 6Zylinder - 14.07.2007, 00:57
Metalkopfdichtung - von mattschwarz - 14.07.2007, 10:14
Metalkopfdichtung - von Acki - 15.07.2007, 21:30
Metalkopfdichtung - von 6Zylinder - 15.07.2007, 23:26
Metalkopfdichtung - von Acki - 16.07.2007, 00:40
Metalkopfdichtung - von 6Zylinder - 16.07.2007, 10:55
Metalkopfdichtung - von Acki - 16.07.2007, 11:30

Gehe zu:


Benutzer, die gerade dieses Thema anschauen: 1 Gast/Gäste