Gurte - Druckversion
+- German Drag Racing Board (https://www.dragracing.info/forum)
+-- Forum: Let's Talk about Drag Racing (https://www.dragracing.info/forum/forum-3.html)
+--- Forum: Neuigkeiten und Informationen (https://www.dragracing.info/forum/forum-7.html)
+---- Forum: DMSB, Regeln, etc. (https://www.dragracing.info/forum/forum-41.html)
+---- Thema: Gurte (/thread-45.html)
+- German Drag Racing Board (https://www.dragracing.info/forum)
+-- Forum: Let's Talk about Drag Racing (https://www.dragracing.info/forum/forum-3.html)
+--- Forum: Neuigkeiten und Informationen (https://www.dragracing.info/forum/forum-7.html)
+---- Forum: DMSB, Regeln, etc. (https://www.dragracing.info/forum/forum-41.html)
+---- Thema: Gurte (/thread-45.html)
Gurte - mr.t - 28.04.2002
Wer kann mir sagen wie lange ich meine Gurte
verwenden darf ?(
Gurte - Torsten Kath - 28.04.2002
Also alles bis Advanced ET und Pro Mod können drei Jahre benutzt werden, ab Advanced ET und Pro Mod 2 Jahre.
Ohne Gewähr den laut Reglement ist dort kein Eintrag. Ist bestimmt vergessen worden. Ich hatte letztes Jahr von Mike die Auskunft bekommen.
Gruß Torsten ®
Gurte - Manfred - 28.04.2002
Hi Stefan,
lt Reglement muss das Driver Restrain System (Sicherheitsgurte) nach SFI 16.1 bei den FIA Klassen und Advanced ET alle 2 Jahre, bei den nicht FIA Klassen alle 4 Jahre überprüft werden. Wenn Pro Mod im nächsten Jahr im Rgelement aufgenommen werden sollte, dann werden die Überprüfungsintervalle Adv. ET gleichgestellt.
Gruss Manfred
Gurte - mr.t - 12.08.2002
Im Klartext also ET/SST/SG/SC/Comp/ 4 Jahre
und alles andere darüber 2 Jahre
Richtig?
Gurte - osldon - 12.12.2002
Check the http://www.sfifoundation.com under specifications.
That is were you find many specs. DMSB should be able to pull and share sfi spec sheets for you.
rEGARDS,
dON
Gurte - Heartbeat-Racing - 15.12.2002
Wo kann man die abgelaufenen Gurte Up - Daten lassen?
oder sind die dann hinüber ? 8o
Kann mir ja nicht alle 4 Jahre neue Gurte kaufen
Heartbeat - Racing
Tom
Gurte - Torsten Kath - 15.12.2002
Doch ist leider so Tom,
die Gurte können nicht abgedatet werden. Aber tröste Dich, ich brauche alle 2 Jahre neue Gurte.
Allerdings ist dies auch eine der wenigen Zeitrahmen die ich nachvollziehen kann. Gurte sind ohne Frage eines der wichtiges Teile im Auto. Anders sieht es bei Kupplungsglocken aus, die jedes Jahr abgenommen werden müssen (100 Dollar Gebühr) und dann noch nicht einmal gefluxt werden. X(
Was soll es, also haste gleich eine Sache die Du Dir zu Weihnachten wünschen kannst
Bis dann,
Torsten
Gurte - osldon - 16.12.2002
When an organization is SFI affiliate the organization has the possibility to certify inspectors.
There is a SFI affiliate on Germany.
There is also an anual chassis check/test at the Hockenheim Ring.
I will contact Carl Olson and ask him if and how a racer could have his gurte checked and approved. Just like with Chassis.
Later,
Don
Gurte - osldon - 17.12.2002
Folks,
Below the answer from Carl Olson, Motorsport manager at SFI Foundation.
Dear Mr. Leemker:
Thank you so much for informing us that DHRA has signed the Letter of
Agreement, and will become an SFI Affiliated Sanctioning Organization. We
look forward to working with you and your associates toward a safer sport in
Holland.
With regard to re-certification (renewal) of safety related items certified
as meeting SFI Quality Assurance Specifications, please be advised that many
items do not have a specific service life, and need not be re-certified.
These items are merely inspected by the scrutineers at sanctioned racing
events, who check to make sure the item is properly identified with the
appropriate SFI tag, label or patch, and has not been modified or damaged in
any way.
In those product categories with a stated service life, the original
manufacturer of such items as drivers protective clothing and seat belts
will, in many cases, re-certify products that are unmodified, and remain in
serviceable condition. If the product cannot be re-certified due to damage
or modification, it is necessary for the racer to purchase a new, certified
product.
You should also be aware that each year, the SFI conducts a European
Certification Tour for the inspection and re-certification of such items as
flywheels, clutches, safety bellhousings and chassis. In March of 2003,
inspections will take place in England, Sweden, Finland and Germany (at the
Hockenheimring). Starting in 2004, if there are sufficient products needing
inspection and re-certification, a tour stop in Holland can certainly be
arranged.
In the meantime, following next year's Hockenheim inspection program, SFI
President, Mr. Arnold Kuhns, will be in Frankfurt, Germany on Wednesday
morning, 5 March 2003 prior to his return to the U.S.A. If you and your
associates would like to meet with Mr. Kuhns to discuss your involvement
with the SFI Foundation, he would be happy to meet with you. If you are
interested in scheduling such a meeting, please let me know, and I will help
set it up.
I hope I have answered all of your questions. Should you have further
questions or comments, please feel free to contact me at your convenience.
Best regards,
CARL V. OLSON
Motorsports Manager
Gurte - richarzzz - 29.10.2004
wenn ihr in zukunft ausschl. schwarze simpson gurte verwendet - dann nehm ich sie euch für einen ordentlichen obulus ab wenn sie abgelaufen sind!